Non standard designing cnc pipe bending machine applying to diesel
--Operating system instruction
1. Turn on the power to enter the boot interface. The boot
interface mainly displays the company's relevant information
(including the machine model, manufacturer, manufacturer site
Site and its contact information, system date and time, etc.). The
user can log in to operate the system.
2. Manual mode interface
2.1. Control the start and stop of the oil pump.
2.2.After the oil pump is started, press the corresponding button
to manually control the main clamp, guide clamp, mandrel, auxiliary
pusher, material rack, catch mode, bend axis action. In order to
enter the core, it is necessary to return the main clip, guide
clip, and bent arm to the original point.
2.3. In the interface can be switched to automatic mode, parameter
settings, fittings programming, I / O mode or return to the home
2.4. Manually rotate forward and reverse the corner shaft. Such as
"corner jog" tick, forward or reverse button press and hold. To do
so, release the corner of the button and stop. Corner angle and
speed can be set individually.
2.5. Manually advance, retreat and return the feeding axis. If
"Feeding Jog" ticks, forward or back button
When you press and hold, the button stops and the cart stops. Feed
length and speed can be set individually.
2.6. In this interface, you can switch to single-bend mode,
automatic mode, file management, I/O mode, or return to the
3. Single bending mode interface. The single-bend mode allows the
equipment to automatically perform single-bend mass production of
pipes, after the parts of the equipment have been manually adjusted
(including molds and parameters).
3.1. File name: The name of the processed workpiece number, which
can be set in Chinese, English or numbers.
3.2. Setting value: Angle set by C elbow.
3.3. Present value: Current angle of C bend.
3.4. The preset output sets the number of pipes to be processed;
the current output shows the number of completed pipes; it helps
the user to master the production schedule. Press Zero to zero the
3.5. Before the automatic operation, you must first press the
"Start" button, then follow the text prompts at the bottom of the
interface to start the foot switch and start production. If you
need to pause during automatic operation, you can press the “pause”
button or pause the foot switch, and then press “pause” or pause to
stop the pedal switch to continue running.
3.6. In this interface you can switch to manual mode, automatic
mode, file management, I/O mode, or back to home page (open machine
-- Machine characteristics
1. XYZ coordinate can be automatically changed into YBC process
2. Documents is protected by key to prevent it from being amended
3. Electric system is matched with heat exchanger for automatic
cooling. You can also select numerical control air conditioner to
maintain the use life of electric system.
4. It is equipped with automatic adding oil system to decrease
friction between bending tubes, prolong use life of mandrel and
guarantee the quality of bending tubes.
5. The positions of material entrance, safety, input mold interfere
and conduct mold interfere of material feed trolley can be set by
hand and automatically memorized to cancel man measurement error
and loss of machine collision.
-- Applicable industry
Recommended application industry: automobile fittings, oil pipe for
brake, muffler, seats, motorcycle fittings, healthy equipment,
air-conditioning, bicycle, steel furniture, sanitary wares and so
Automobile, locomotive, motorcycle, ship, ship, petrochemical,
electric power, natural gas, nuclear industry, boiler, vehicle,
fitness equipment, sports goods and other fittings.
-- Specifications of machine
|Maximum applicable carbon steel pipe||Ø38.1*2.0t|
|Maximum applicable stainless steel pipe||Ø31.7*2.2t|
|*Maximum feeding length||2050mm|
|*Maximum coring length||2950mm|
|Feeding mode||Clamping feeding|
|*Maximum bending radius||200mm|
|Maximum bending angle||190°|
|*Settable bending angles of each pipe fitting||36|
|Main motor power||5kw|
|Maximum oil pressure||12MPa|
-- Company service
1. Payment terms: 30% T/T down payment and 70% T/T before shipment.
2. Delivery time: No later than 15 days since receiving the advance
3. Validity of the price: For ONE month.
4. Package: Wooden case.
5. Warranty period: We guarantee machine quality for 12 months.
During this period, if spare parts of the machine were damaged, we
can send the component to the customer by international express
-- Pictures of machine