Medical equipment precision hot runner mold

Medical precision implement mold:JK-MOLD offer one station solution of all medical implement precision thin-walled molds with over 200 sets experience of design and building.Machining accuracy,design circle time,cooling solution and ejecting system are very important factor for the Medical implement precision mold.
Machining accuracy of precision thin-walled sylinge mold:averange thickness wall is only 0.6mm which need high quality inserts and close tolerance core bushing to make precision alignment.also there is another measure employed into structure to guarantee the center alignment between core and cavity during molding.Because even a little mismatch will cause the short-shot.

The molding circle time of syringe thin-walled mold is only 9s,which need exact caculation and serious moldflow analysis for the gating system,ejecting system and cooling system before mold making.The action should be smooth and stable during high-speed ejection,the part will be damaged by ejector if could not take off the part within 9s.That is why we need enough cooling lines to guarantee these system can cool the part within 3-4 seconds.

Below is general principle for the syringe thin-walled mold:
1)LKM molbbase with HUSKY hot runner system.
2)PP material and 1x8-cavity and the molding circle time is 9s.
3)Hascoe or same level mold standard components.
4)BAST1/4" PLUG and 4 groups cooling lines.
With built 300 different kinds of syringe thin-walled mold in past years,JK-MOLD get much more rich experince and can offer one-station solution for the thin-walled mold making and molding.Your confidence guarantor--JK-MOLD.
Artical come from JK-MOLD,website is www.jk-mold.com