SNU series high gloss ink for water-proof nylon

APPLICATION INFORMATION
MESH
Monofilament mesh, 60-120T.
SQUEEGEE
65-85 durometer solvent resistance blade, such as PU
COVERAGE
Approx. 30O/kg under 80T mesh
CURE
Force to dry with hot air dryer below 100 is allowed.
ADDITIVES
007 thinner, 719 fast dry thinner, 718 medium dry thinner or 783 slow dry thinner.
CLEAN UP
Use organic solvent to clean the stencil, such as 007 cleaner.

NOTE
1 To dissolve the ink evenly and avoiding rough finished printing surface, use stronger thinner.
2 As PVC doesnt have good solvent resistance, it may cause sticky problem when stack nylon with PVC filmed back, make sure finished products are dried thoroughly and avoid stacking together.
3 When printing on nylon with PVC filmed back, as the PVC contains anti-stickers, it s easy to cause color transformation, to solve this problem, use colors with good penetration resistance.
4 It is recommended to test beforehand to ensure good adhesion to different substrates.
5 If 9004 or 9005 was added, the printing process should be finished within 8 hours.

PRODUCT RANGE AND PACKAGE
All the colors except outdoor process colors are available in 1KG, 5KG and 20KG containers.

STORAGE
Two years under sunless condition of 5-25, avoid contacting with acid and alkali.