Stainless steel bellows compensator

Product Description:Bellows compensator, also known as expansion joint, or expansion joints. The main body was constituted by the bellows (a flexible element) and the side tubes, brackets, flanges, pipe and other annexes.
It is a kind of compensation components. By stretching deformation to absorb pipe, ducts, containers and other reasons such as thermal expansion and contraction arising from the size of changes, or compensate for pipelines, conduits, containers and other axial, lateral and angular displacement. Widely used for noise reducing and damping related industry.

Compensate for installation and use requirements
1. A compensation device is installed should be preceded by examination of their models, specifications and piping configuration must meet the design requirements.
2. Right-band compensator sleeve within the sleeve so that the child should pay attention to the direction of flow in the same direction with the media, hinge-type compensator hinge rotation plane should be consistent with the displacement of rotating plane.
3. The need for "cold tight" compensation device, pre-deformation of the auxiliary components used in the pipeline should be removed after installation.
4. Is strictly prohibited to use bellows deformation method to adjust the piping installation ultra-poor, so as not to affect the normal function of compensator, reduce and increase the service life of piping systems, equipment, load bearing components.
5. The installation process, do not allow welding slag splashing into the waves shell surface, not allowed to wave the shell by other mechanical damage.
6. Piping installed, it should be removed as soon as possible on the bellows as a yellow-assisted location to install the transport components and fasteners, in accordance with design requirements to limit the provisions of device transferred, and make the pipe system in the environmental conditions there is sufficient the ability to compensate.
7. Compensator components of all activities shall be stuck outside components or limit the scope of its activities, should ensure that all activities in parts of the normal operation.
8. Hydraulic pressure test, the response with compensator pipe end of the second fixed tube frame reinforcement, so that pipe movement or rotation does not occur. Medium used for gas compensator and its connecting pipeline, should pay attention to whether the need for additional water-filled temporary support. Hydrostatic test water washing liquid 96 chloride ion content of no more than 25PPM.
9. Hydraulic pressure test after row of waves as soon as possible the shell in the water, and shell surface-wave drying quickly.
10. With the compensator bellows contact with insulation material should not be chlorine ions.

p>Product Description:Bellows compensator, also known as expansion joint, or expansion joints. The main body was constituted by the bellows (a flexible element) and the side tubes, brackets, flanges, pipe and other annexes.
It is a kind of compensation components. By stretching deformation to absorb pipe, ducts, containers and other reasons such as thermal expansion and contraction arising from the size of changes, or compensate for pipelines, conduits, containers and other axial, lateral and angular displacement. Widely used for noise reducing and damping related industry.

Compensate for installation and use requirements
1. A compensation device is installed should be preceded by examination of their models, specifications and piping configuration must meet the design requirements.
2. Right-band compensator sleeve within the sleeve so that the child should pay attention to the direction of flow in the same direction with the media, hinge-type compensator hinge rotation plane should be consistent with the displacement of rotating plane.
3. The need for "cold tight" compensation device, pre-deformation of the auxiliary components used in the pipeline should be removed after installation.
4. Is strictly prohibited to use bellows deformation method to adjust the piping installation ultra-poor, so as not to affect the normal function of compensator, reduce and increase the service life of piping sys