SYSCAL PRO method for product information
10 channels of simultaneous reception
1000V-250W-2.5A
Automatically enter an adjustment
Electrodes can be switched
SYSCAL PRO: electric instrument is a new system for high-frequency
output and IP resistance measurement. Based on its high-power
output, this system applies to the field of groundwater
exploration, civil engineering, application of the external
environment.
Automatic adjustment of input: output current can be automatically
adjusted with input voltage phase, so as to ensure the quality of
measurement. This system may also be the operator to set the
voltage specific needs of the current to achieve.
IP Survey: 10 channels of directly through the IP-screen LCD
display.
Marine Applications: The system will provide continuous measurement
range, especially in the Ocean. In this mode, GSP by 10-channel
recording the location, directly connected modules. Measured every
two seconds and save 10 resistance coefficient. Application of the
marine environment, you must use a special cable can be applied to
the environment. A specialized PC remote control software for data
storage and resistivity of the real-time imaging. .
Program-controlled software: special software can be programmed on
a PC remote control of the host equipment. This feature has the
advantage of being directly to the data can be stored on a PC hard
drive, thus avoiding a host of memory for data storage capacity
constraints (especially when it is marine applications), not only
faster statistics to measure results, but also through before
Collection of data analysis to make more rational future work plan.
.
Electrode switch features: built-in electrodes will be added to the
switch plate on the motherboard, will be able to achieve rapid
resistivity imaging system, which is Syscal Pro switch48-72 or 96
(the number of electrodes), and also access to 10 measurements and
as a group Real-time data transmission and automatically generate
electrode. There are also external switch board (known as Switch
Pro), can be used to add to the host, thereby achieving
three-dimensional observation function. Its output characteristics:
Max 800 V-250W-2.5A.
Syscal Pro switching components structure
This part of the core for the whole machine, each multi-core cables
covered by the scope of the standard diameter of five meters and 10
meters, in order to reduce weight makes it easy to transport, if
each coil was divided into parts.
Standard electrode arrays measuring the results of Syscal Pro
system directly through an automated process. Another non-standard
configuration of the array electrode by the data transmission
through ELECTRE II to Syscal Pro software system for processing.
Syscal Pro electric instrument can also add additional features to
achieve Figure 3 D effect. Each individual instrument can be
included in addition to matching the 48,72 and 96 electrodes
functions, also includes 12 v rechargeable batteries and the LCD
screen, users can connect the host to quite a number of electrodes
to measure the user environment Requirements.
Data processing
Syscal because of the supporting software, we can not only carry
out data processing, and can more clearly see resistivity imaging
map. This means that we can also access the text of image data to
the format of one-dimensional, two-dimensional or three-dimensional
image of the output.
Technical parameters
Output specifications
Automatically enter an adjustment (microprocessor control)
Current: Max 2.5 A
Voltage: Max 1000 V (outside the DC / DC converter at 1500 V)
Power: the largest 250 W (external DC / DC converter at 500 W), can
also use an external 1200 W of AC / DC converter of.
PWM (pulse duration): 0.2, 0.25, 0.5, 1, 2, 4, 8 seconds
Current measurements Accuracy: 0.2%
Optional feature output voltage: the largest 800 volts
Enter specifications
Survey: Auto and set school
Input impedance: 100 milliohms
Input voltage: Channel 1's maximum voltage of 15 V; Channel 2 - the
biggest 10-channel voltage of 15 V; biggest security value: 1000 v
50-60Hz optional power cord; voltage measurement accuracy: 0.2%
Resolution: 1 uV
Noise suppression: automatically display standard measurements
SP (SP)
Excitation polarization (IP)
Common parameters
Matching up to 4000 electrodes
Flash memory capacity: more than 21,000 readings
Through data transmission port RS-S232
Power: two 12 V power supply rooms, 7.2 Ah battery; optional 12 V
standard car charger (connected with the transmitter)
Earthquake glass steel box
Operating temperature: -20-70 C
Size: (Syscal Pro Switch-48 as an example): 312336cm
Weight: (Syscal Pro Switch-48 as an example): 13 Kg
With 24 coils (from the inter |
