Vertical Manual Coal-fired Heat Transfer Oil Furnace
Shandong Longxing Chemical Industry Machinery Group is sincerely at
your service! 1.Descriptions:
The heat transfer oil furnace,with stable performance and reliable
quality, is examined and approved by the State Technical
Supervision Bureau, and is tested by Yantai City.
The machine runs with coal, heavy oil, light oil or flammable
liquid as fuel, heat transfer oil as heat carrier. It transports
heat to devices by the forced liquid circulation of the oil pump,
then returns to re-heating.
This once-through type special industrial furnace is widely used in
petrochemical, textile, printing and dyeing, plastic, rubber, food
processing, wood processing, asphalt heating, carton production,
vegetable dehydration, baking varnish and sand mold casting.
2. Categories:
The equipment is made up of furnace body and furnace base.The
medium and small furnaces adopts vertical cylindrical structure,and
the large furnace uses horizontal box structure.It has two ways of
combustion:machanical and manual burnings. The base of the
mechanical buring furnace consists of reduction box,stoker and
tapping machine and has three kinds of grates:chain
grate,reciprocating grate and climbing grate.The manual burning
furnace uses the fixed grate, manual casting coal and tapping.
3. Features:
The device can run at a lower pressure and get a higher operating
temperature.
The machine can get the stable heating and precise temperature.
At all levels of load, thermal efficiency is maintained at optimum
levels.
The machine uses liquid phase to transport heat,and at 300 heat
carrier is 70 times lower than the saturated steam pressure of
water.
It has complete operational control and security monitoring
devices.
It helps to save electricity, oil and water,and can recover
investment in 3 to 6 months.
4.Main Technical parameters:
Type | YGL-116MA (10) | YGL-230MA (20) | YGL-350MA (30) | YGL-470MA (40) | YGL-700MA (60) | YGL-930MA (80) |
Rated Thermal Power (Kw) | 116 | 230 | 350 | 470 | 700 | 930 |
Thermal efficiency () | 62 |
Design PressureMpa | 0.7 |
Media Highest temperature | 320 |
Furnace oil Capacity(m) | 0.08 | 0.18 | 0.34 | 0.4 | 0.6 | 1.2 |
Circulating Oil Volume(m/h) | 12.5 | 20 | 29 | 43 | 57 | 78 |
Coal Consumption (Kg/h) | 37 | 74 | 97 | 146 | 217 | 335 |
Tubing Connecter Caliber(DN) | 50 | 65 | 65 | 80 | 100 | 125 |
System Installed Capacity(Kw) | 5.6 | 8.1 | 10.5 | 15.5 | 22 | 22 |
Dimensions (mm) | D | 1142 | 1250 | 1350 | 1500 | 1700 | 1940 |
H | 2300 | 2285 | 2905 | 3360 | 3263 | 4586 |
Equipment Weight (kg) | 1880 | 2300 | 3100 | 3600 | 4070 | 8180 |
